|
|
|
|
■ Excellent filter performance for applications with high interference levels ■ Filters for two-phase supply up to 2x 520VAC (P - P) available ■ Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45A ■ Industrial grade terminal blocks for unsurpassed electrical safety |
|
|
|
|
| Type: | FN-2410 / FN-2412 |
| Maximum continuous operating voltage: |
1x 250VAC (FN 2410 / FN 2412) 2x 520VAC (FN 2410H / FN 2412H) |
| Operating frequency: | dc to 400Hz (except FN 2410H-60/-80/100: 250Hz) |
| Rated currents: |
8 to 100A @ 50°C (FN 2410) 8 to 45A @ 50°C (FN 2412) |
| High potential test voltage: |
P –> E 2000VAC for 2 sec P –> N 1100VDC for 2 sec P –> E 2700VDC for 2 sec (H-types) P –> P 2250VDC for 2 sec (H-types) |
| Protection category: | IP20 |
|
Overload capability: |
4x rated current at switch on, 1.5x rated current for 1 minute, once per hour |
| Temperature range (operation and storage): | -25°C to +100°C (25/100/21) |
| Flammability corresponding to: | UL94V-2 or better |
| Design corresponding to: | UL1283, CSA22.2 No. 8 1986, EN 133‘200 |
|
MTBF @ 50°C/250V (Mil-HB-217F): |
1,200,000 hours |
| MTBF @ 50°C/520V (Mil-HB-217F): | 250,000 hours (H-types) |
|
|
|
|
|
|
 |
 |
|
|
